3. Component replacement
(10)Remove the e-ring ⑪ , and remove the Clutch ⑫ .
3.2.18 TR-Assy-Front
(1) Remove the transfer roller.(Refer to 3.2.1)
(2) Remove the Cover–Side-R. (Refer to 3.2.5)
(3) Remove the Remove the plate shield(Refer to 3.2.8)
(4) Disconnect all cable of TR-Assy-Front from the PU/CU-Board.
(5) Remove the three screws (silver) ① , and remove the TR-Assy-Front ② .
①
②
⑫
⑪
3-15 /
45387101TH Rev.1