Toshiba e-STUDIO477S Service Manual page 37

(2)-2 Put the bottoms of the anti-tip feet (both sides) on the floor, align the sides to
the cabinet and tighten them with the two screws each.
Screw Hole
Anti-tip-foot Side
Notes! •Do not tighten the upper screws.
•When you tighten the bottom screws, attach the anti-tip foot to the
location where a screw does not incline.
*You can the attach the screws to Case1 and Case2. As the screw incline
when you tighten the screw in Case3, lift the anti-tip foot and attach the
screw to Case2.
Case1
Screw Hole
OK
(2)-3 Tighten the anti-tip foot covers (both sides) and anti-tip feet with two screws
each.
Anti-tip foot Cover
45387101TH Rev.1
Screw Hole
Case2 Case3
Screw Hole Screw Hole
OK NG
(2)-4 Align the anti-tip foot cover (rear) to the rear side of the anti-tip foot.
Anti-tip foot Cover (Rear)
(2)-5 Put the bottoms of the anti-tip feet on the floor and tighten them with three
screws.
2. Set up
2-8 /