Toshiba e-STUDIO477S Service Manual page 76

② -1 Plate-Assy-Side-R
EM-30LP Class C
Apply a normal amount of
MOLYKOTE(EM-30LP)
to the hatched areas.
(Gear tooth surface)
EM-30LP Class C
Apply a normal amount of
MOLYKOTE(EM-30LP)
to the hatched areas.
(Shaft surface side)
45387101TH Rev.1
② -2 Plate-Assy-Side-R
EM-30LP Class B
Apply a normal amount of MOLYKOTE
(EM-30LP) to the sliding surface with
Drum Shaft (hatched areas).
Plate-ID-Gear(Caulking)
3. Component replacement
Plate-Assy-Side-R
EM-30LP Class A
Apply a normal amount of
MOLYKOTE (EM-30LP) to the
hatched areas of Spring-ID-R.
3-38 /