Toshiba e-STUDIO477S Service Manual page 78

② -5 Plate-Assy-Side-R
EM-30LP Class C
Apply a normal amount of
MOLYKOTE (EM-30LP) to he t
hatched areas.
(Gear tooth surface)
Gear-FU-A
EM-30LP Class C
Apply a normal amount of
MOLYKOTE (EM-30LP) to t
hatched areas.
(Gear tooth surface)
HP-300Class C
Apply a normal amount of
Gear-FU-D
MOLYKOTE (HP-300) to the
hatched areas.
(Gear tooth surface)
HP-300 Class C
Apply a normal amount of
MOLYKOTE (HP-300) to the
hatched areas.
(Shaft surface side)
45387101TH Rev.1
HP-300Class C
Apply a normal amount of
MOLYKOTE (HP-300) to the
hatched areas.
(Gear tooth surface)
Gear-FU-B
he
HP-300Class C
Apply a normal amount of
MOLYKOTE (HP-300) to the
hatched areas.
Gear-FU-C
(Gear tooth surface)
Plate-Gear-FU-B_Caulking
EM-30LP Class C
Apply a normal amount of
MOLYKOTE (EM-30LP) to the
hatched areas.
(Shaft surface side)
③ TR-Assy-Middle
EM-30LP Class C
Apply a normal amount of
MOLYKOTE (EM-30LP) to the
hatched areas.
(Bearing sliding surface)
Gear-TR-Z23
EM-30LP Class C
Apply a normal amount of
MOLYKOTE (EM-30LP) to the
hatched areas.
(Gear tooth surface)
C-9310 or C-5005 Class A
Apply a normal amount of
Tetra(C-9310 or C-5005) to
the cross hatched areas.
(Contact surface)
3. Component replacement
Bearing-TR
Roller-Transfer
3-40 /