Compornent Replacement - Toshiba e-STUDIO477S Service Manual

3.

Compornent replacement

In this chapter, the procedure for replacement of part, assembly and unit is described.
The replacement procedure is described by removal of the parts. please install the new parts with
following the replacement procedure in reverse order.
The parts (such as ① , ② )shown in the manual are different from the parts used in the Disassmbly
for Maintenance figure (45387101TL) and RSPL (45387101TR).
3.1 Precautions on component replacement .....................................3-2
3.2 Method of component replacement .............................................3-4
3.3 Check the Scanner Mech Level and SU FW version .................3-35
3.4 Oiling Spots ...............................................................................3-36