4.2.1.10 LED head serial number display
This self-diagnostic menu item is used to check whether the downloaded LED head data
matches the serial number of the actual LED head.
1.
Enter the self-diagnostic mode (level 1) and press the [2], [8] key until "LED
HEAD DATA" is displayed in the upper row of the display area. (Pressing the [2]
key increments the test item and pressing the [8] key decrements the test item.)
Press the [6] key when "LED HEAD DATA" is displayed in the display area.
2.
When the [2] key or the [8] key is pressed, serial numbers of the K LED head
data are displayed in order.
3.
Pressing the [4] key terminates the test. (Returns to the status of step 1.)
K ** **
****
xxxxxxxxxxxxx
** ** ** ****: Rev number
xxxxxxxxxxxxxxxx: serial number
4.2.1.11 NVRAM parameter setting
Do not use this menu item.
45387101TH Rev.1
4. Maintenance Menu
4-16 /