Toshiba e-STUDIO477S Service Manual page 92

4.1 Maintenance Utility
The adjustments described in table 5-1 should be made by using Maintenance Utility.
The following details the utility:
(1) Maintenance Utility Operating Manuals:
42678818FU02 Rev2 or higher(English)
(2) Maintenance Utility program:
Applicable operating system
Windows 2000/XP/Vista/7
(English)
Table 5-1: Adjustment options in Maintenance Utility
Option Adjustment
1 Board Copies information in the EEPROM in
replacement the PU block, and the settings in the
EEPROM in the CU block.
Purpose: To copy the above data onto
a CU/PU board with which to replace
the CU/PU board for a maintenance
purpose.
2 Serial Rewrites the serial number recorded in
number the PU block and selects and rewrites
setting the printer serial number recorded in
the CU block and rewrites the output
mode recorded in it.
Purpose: To configure a maintenance
replacement PU/CU board onto which
the CU/PU board information cannot
be copied with the board replacement
function (e.g. due to an interface error).
45387101TH Rev.1
File name Part number
MuWin.zip 42678818FW01 Rev2
1.41.0.1800
Section in Operation from
Maintenance operator panel
Utility (section in this
Operating maintenance
Manual manual)
2.4.1.1.1 Unavailable
2.4.1.1.2.3 Unavailable
Option Adjustment
3 Factory/ Switches between the Factory and
Shipping Shipping modes.
mode Purpose: To configure a maintenance
replacement PU board onto which the
CU/PU board information cannot be
copied with the board replacement
function (e.g. due to an interface error).
The maintenance board is put to the
Factory mode usually by default and,
by using this function, must be set to
the Shipping mode.
4 Board Checks serial number information and
option setup the Factory/Shipping mode.
information
5 Send to file Send the specify file.
Note: Do not operate or set options added with 'Never use this option,' or a
malfunction is potentially caused.
4. Maintenance Menu
Section in Operation from
Maintenance operator panel
Utility (section in this
Operating maintenance
Manual manual)
2.4.1.1.2.4 5.2.1.10
2.4.1.1.5 Unavailable
2.4.1.2.1 Unavailable
4-2 /