3.2.27 ADF-unit
(1) Remove the cover-ADF-R. (Refer to 2.2.27)
(2) Detach a connector from the ADF board(7RL), and remove the screw(silver) ①
and FG cable ② .
(3) Open the ADF-unit ③ while pushing the portion B and remove the clamp cable.
B
ViewA
ViewA
45387101TH Rev.1
① ②
FG cable
③
(4) Remove the ADF-unit by insert the flat-blade screwdriver to gap betweenADF-unit
and flatbed-unit with pull the cables out of the Frame-Base (ADF) and Hinge.
Note! To see the Section 3.3 when replacement the ADF-unit ③ .
③
Frame-Base(ADF)
Flatbed-unit
3. Component replacement
Screwdriver
3-26 /