Replacing The 8 Kw Axial Fan; Replacing The 16 Kw Axial Fan - Fronius Selectiva 2100 Service Manual

Replacing the 8 Removing the axial fan:
kW axial fan
(1)
(2)
Installing the axial fan:
(1)
(2)
Replacing the 16 Removing the axial fan:
kW axial fan
122
(2) (2) (2)
Remove the front panel and the device
1
frame on the AC side (see the
"Opening the device" section)
Remove the axial fan cable from the
2
strain-relief device (1) and detach it
from the primary power module (2)
Gently bend the fan frame tabs out-
3
wards and remove the axial fan
CAUTION! Be careful not to press
on the rotor when inserting the fan
Clip the new axial fan into the fan fra-
1
me, with the direction of air flow into the
device
Insert the axial fan cable into the strain-
2
relief device provided (1) and connect
it to the primary power module (2)
Fit the front panel and the device frame
3
on the AC side (see the "Closing the
device" section)
Remove the front panel and the device
1
frame on the AC side (see the
(1)
"Opening the device" section)
Disconnect the axial fan cable from the
2
primary power module and remove it
from the strain-relief device
Remove the bushing sleeve (1) to-
3
gether with the axial fan cable from the
fan mounting
Undo the three 5x12 TX25 screws (2)
4
Remove the fan module
5