Fronius Selectiva 2100 Service Manual page 119

(8) (7)
(9)
(9)
Installing the primary power module:
(6)
Place the primary rectifier in position
(8)
5
and fit it with two 5x16 TX25 screws (8)
[3 Nm]
Connect the five 5x10 TX25 screws (7)
6
on the cable connections to the pri-
mary rectifier
[3 Nm]
Removing the primary power module
(9)
from the replacement packaging:
Undo the four 5x10 TX25 tapping
1
screws (9) and remove from the packa-
ging frame
CAUTION! The faulty primary
power module must be screwed
into the replacement packaging
and returned to Fronius! No guar-
antee or warranty claims can be
made if the item is not returned
properly!
(9)
Place the new primary power module
1
in position
- Fit the PFC inductor connection
(6) to the primary rectifier in the
correct sequence:
Primary rectifier
PFC cable
Varistor
One 5x10 TX25 tapping
screw [3 Nm]
119