Specifying The Scan Settings; Adjusting Image Density; Selecting The Document Type According To Original - Ricoh SP 200S Operating Instructions Manual

4. Copying Originals

Specifying the Scan Settings

This section describes how to specify image density and scan quality for the current job.

Adjusting Image Density

There are three image density levels. The higher the density level, the darker the printout.
1. Press the [
The print density is indicated by which segment is lit on this indicator.
• Left: Lighter than normal
• Middle: Normal density
• Right: Darker than normal

Selecting the Document Type According to Original

There are three document types:
Text
Select this when the original contains only text and no photographs or images.
Photo
Select this when the original contains only photographs or images. Use this mode for the following
types of original:
• Photographs
• Pages that are entirely or mainly composed of photographs or images, such as magazine
pages.
Text/Photo
Select this when the original contains both text and photographs or images.
38
] key until the density level you want is displayed.
CTT087