Ricoh SP 200S Operating Instructions Manual page 249

Problem
Cannot print received faxes.
Faxes you sent appear spotty or
dirty when received.
A fax you sent appears blank
when received.
Dirty spots may appear, or an
image from the reverse side shows
through copy received by the
recipient.
Dial fails when trying to send
faxes.
• Tray 1 is empty. Load paper in Tray 1. See page 27
"Loading Paper".
• Tray 1 does not contain paper of the right size. Load
paper of the right size in Tray 1.
• The exposure glass or ADF is dirty. See page 146
"Cleaning the Auto Document Feeder".
• Before placing originals on the exposure glass, make
sure that ink or correction fluid is dry.
The original was placed upside down. Place the original in
the correct orientation. See page 35 "Placing Originals".
Image density is too high. Adjust the image density.
Check the error code, and then perform the appropriate
procedure to resolve the problem.
Fax Problems
Solution
163