Loading Paper; Loading Paper Into Tray 1 - Ricoh SP 200S Operating Instructions Manual

Loading Paper

Load a stack of paper for printing in the input tray.
• When loading paper, be sure to configure the paper size and paper type for the bypass tray and
Tray 1. When printing a document, specify the paper size, paper type and select the paper tray in
the printer driver so that the settings configured when paper is loaded can be used for printing.
• If you print test pages when the bypass tray is loaded, the paper in the bypass tray is fed first.
• Do not load paper in the bypass tray when the machine is warming up.

Loading Paper into Tray 1

1. Pull Tray 1 out slowly, and then remove it using both hands.
Place the tray on a flat surface.
2. Pinch the clip on the side paper guide and slide it to match the standard size.
CTT062
CTT073
Loading Paper
13