Specifying The Scan Settings; Specifying The Scanning Size According To The Size Of The Original; Adjusting Image Density - Ricoh SP 200S Operating Instructions Manual

Specifying the Scan Settings

Specifying the Scanning Size According to the Size of the Original

1. Press the [ ] key.
2. Using the number keys, enter the number of a registered scan destination.
For details, see page 62 "Registering the Scan Destination".
3. Press the [OK] key.
4. Press the [ ] or [ ] key to select [Original Size], and then press the [OK] key.
5. Press the [ ] or [ ] key to select the original size, and then press the [OK] key.
6. Press the [ ] key to return to the initial screen.

Adjusting Image Density

There are five image density levels. The higher the density level, the darker the scanned image.
1. Press the [ ] key.
CTT103
CTT103
Specifying the Scan Settings
67