Configuring The Snmp Settings - Ricoh SP 200S Operating Instructions Manual

8. Configuring the Machine Using Utilities
Details
Item
Default Gateway
Address
DNS Server
DHCPv6 Mode
IAID
LPR
RAW
IPP

Configuring the SNMP settings

Click [SNMP] to display the page for configuring the SNMP settings.
132
Enter the default gateway address.
The default gateway address is the IP address of the host or router used as the
gateway when communicating (printing or exchanging information) with a
computer on another network.
When using DHCP, the default gateway address obtained from the DHCP
server is used. If the address cannot be obtained from the DHCP server, the
default gateway address set for the device is used.
Select whether to use the DNS server obtained from the DHCP server, or the
DNS server set for the device.
Select an operation mode for DHCPv6.
• DHCPv6
Operates in DHCPv6 mode.
Obtains the IPv6 address and other parameters.
• DHCPv6-lite
Operates in DHCPv6-lite mode.
Obtains parameters except the IPv6 address.
IAID is ID to identity IPv6 address and it is needed for acquiring reserved IPv6
address.
Select to enable network printing using LPR/LPD.
Select to enable network raw printing.
Select to enable network printing using Internet Print Protocol.
Description