Specifying The Scan Settings - Ricoh SP 200S Operating Instructions Manual

6. Sending and Receiving a Fax
5. Press the [
6. If the original is placed on the exposure glass, press the [1] key (1: TX).
7. Replace the handset.

Specifying the Scan Settings

Adjusting image density
There are five image density levels. The darker the density level, the darker the printout.
1. Press the [
2. Press the [ ] or [ ] key in the standby mode screen to select [Density], and then press the
[OK] key.
3. Press the [ ] or [ ] key to select the density level or [Erase Background], and then press
the [OK] key.
4. Press the [ ] key to return to the initial screen.
• To apply the specified setting to all jobs, not just the current one, specify [Density] in [Fax Features].
88
] key.
CTT008
] key.
CTT102