Placing Originals; About Originals; Placing Originals On The Exposure Glass - Ricoh SP 200S Operating Instructions Manual

2. Loading Paper

Placing Originals

This section describes the types of originals you use set and how to place them.

About Originals

Recommended size of originals
Exposure glass
• Up to 216 mm (8.5 ") in width, up to 297 mm (11.7 ") in length
Unscannable image area
Even if you correctly place originals, margins of a few millimeters on all four sides of the original may not
be scanned.
Margins when using exposure glass
1. Approx. 4.1 mm (0.2 inches)
2. Approx. 3 mm (0.1 inches)
3. Approx. 4 mm (0.2 inches)

Placing Originals on the Exposure Glass

• Do not place originals until all correction fluid or toner becomes completely dry. Doing so may
create marks on the exposure glass that will appear on copies.
24
CHZ916