Ricoh SP 200S Operating Instructions Manual page 336

Software Installation Guide
This manual explains how to install the software over a USB or network connection.
• Network connection is not available for models SP 200/200S/200SF/201SF/202S.
◆
Flowchart
The following flowchart illustrates the software installation procedures over USB and network
connections.
USB Connection
1. Before Installing the Software (Preparing the Necessary Items) (See p.2)
2. Quick Install for USB (Installing the Software) (See p.3)
Network Connection (IPv4 Environment)
1. Before Installing the Software (Preparing the Necessary Items) (See p.6)
2. Selecting the Type and Method of IP Address Configuration (See p.6)
3. Connecting the Computer and Machine (See p.7)
4. Printing a Network Setting List (See p.8)
5. Quick Install for Network (Installing the Software) (See p.9)
6. After Installing the Software (Checking the IP Address) (See p.12)
Network Connection (IPv6 Environment)
1. Before Installing the Software (Preparing the Necessary Items) (See p.6)
2. Selecting the Type and Method of IP Address Configuration (See p.6)
3. Connecting the Computer and Machine (See p.7)
4. Printing a Network Setting List (See p.8)
5. Configuring the IPv6 Address via Web Image Monitor or Control Panel (See
p.15 and the User Guide
6. Quick Install for Network (Installing the Software) (See p.9)
7. After Installing the Software (Checking the IP Address) (See p.12)
)
1