Changing Passcodes - Mircom TX3 SERIES Programming Manual

To edit or delete a correlation
1.
2.
3.
4.
5.
2.13

Changing Passcodes

The Changing Passcodes selection lets you change your passcode for your access
level. There are three access levels.
Level 1. Not used.
Level 2. Level 2 passcode allows access to the operation menu.
Level 3. Level 3 passcode allows access to both operation and configuration
menu. The level 3 passcode is also a network passcode used by the configurator
software. If the level 3 passcode changes, the configurator will not be able to
connect to the panel unless the network password is set to the level 3 passcode.
To change a passcode
1.
2.
3.
Note:
Telephone Access System Programming Manual
Version 2.4
LT-979 Copyright 2016
Press the arrow to scroll to "Correlations" in the main configuration menu
and press the enter (telephone) key. The "Correlation" menu appears.
Select Edit or Delete. A list of all the correlations appears.
Press the arrow keys to scroll to the correlation you would like to edit or
delete.
Press the telephone (enter) key to accept.
Press info key to return to previous menu.
Press the arrow to scroll to "Change Passcode" in the main configuration
menu and press the enter (telephone) key. The "Enter Access Level" entry
appears.
Enter Access Level
< 001>
Press the arrow keys to scroll to your access level and press the telephone
(enter) key to accept.
Enter the new passcode. It can be up to 10 digits long.
If you forgot the new passcode, call Mircom's Technical Support
Department. See Technical Support contact information in
Section 1.5).
Configuration
49