Mircom TX3 SERIES Programming Manual page 21

To change the welcome message
1.
2.
3.
4.
5.
2.6.10 Guard Phone
The Guard phone is an optional auxiliary phone on the lobby control unit that lets
you place calls to residents using their dial code.
To enable the guard phone
1.
2.
3.
4.
2.6.11 Calling Schedule
The Calling Schedule function lets you define when calls to residents are
allowed. For a description on how to define schedules see paragraph 2.8.
Telephone Access System Programming Manual
Version 2.4
LT-979 Copyright 2016
Press the arrow key to scroll to "Welcome Message" and press the
telephone (enter) key. The welcome message appears.
Enter Msg Line - 1
MIRCOM TX3 #1
Press the up arrow key to scroll to the next message line (Line-2) and scroll
up again for next message (Line-3).
Edit each message.
Press the 1 key 9 times to get an asterisk (*).
Press the telephone (enter) key to accept.
Press info key to return to previous menu.
Press the arrow key to scroll to "Guard Phone" and press the telephone
(enter) key. The Guard Phone selection appears.
Guard Phone
[ ] Guard Phone
[ x ] No Guard Phone
Press the up arrow key to see all 3 lines as shown above.
The default is no guard phone. Use the * key to select the Guard Phone if
required and press the telephone (enter) key to accept.
Press info key to return to previous menu.
Configuration
21