Mircom TX3 SERIES Programming Manual page 37

Table 1: List of Screens
Hide Display
[x] Display
Ring Pattern
[x] Ring Pattern 1-5
2.7.2 Using keyless entry codes
To enter the premises with a keyless entry code, you must first be in normal mode.
While in normal mode, press 0, after which point you are prompted with "Enter
keyless code". The keyless code is a numeric value from 1 to 999999.
To enter your keyless code
1.
2.
2.7.3 Selecting a ring pattern (NSL System only)
The ring pattern selection is part of the Database Menu.
Table 2: Available Ring Pattern
Ring
Pattern
1 2s ON
2 800ms
ON
3 200ms
ON
4 200ms
ON
5
Telephone Access System Programming Manual
Version 2.4
LT-979 Copyright 2016
YES YES This feature turns the resident information display ON or
OFF. When OFF the resident's information is only
displayed in configuration mode. Use arrow keys to scroll
and press # or * to make a selection.
YES N/A Enter the ring pattern for the resident. See Table 2 for
available ring patterns. The default is 1. Use arrow keys to
scroll and press # or * to make a selection.
Press 0. The keyless enter code appears.
Enter your keyless code.
Available Ring Pattern
4s OFF
400ms 800ms
OFF ON
400ms 200ms
OFF ON
400ms 800ms
OFF ON
One single ringing burst
4s OFF
400ms 800ms
OFF ON
400ms 200ms
OFF ON
Configuration
standard
ring A
distinct
ring B
4s OFF distinct
ring C
4s OFF distinct
ring D
37