Mircom TX3 SERIES Programming Manual page 48

4.
5.
6.
7.
8.
9.
10.
48 Telephone Access System Programming Manual
LT-979 Copyright 2016
Press the arrow key to scroll to a specific type of input event and press the
telephone (enter) key. The "Response Type" selection appears.
Response Time
< >Turn Output ON
< x >Turn Output OFF
Press the arrow key to scroll to a specific type of output action (response)
and press the telephone (enter) key. The "Response Data" selection
appears.
Response Data
< >GP Output 1
< x >GP Output 2
Press the arrow key to scroll to a specific output and press the telephone
(enter) key. The "Schedule" selection appears
Select Schedule
0 Always
Press the arrow key to select a specific schedule and press the telephone
(enter) key. The "Correlation Timer" entry appears
Corr Timer
[ 001]
Press the arrow key to specify the duration for the correlation and press the
telephone (enter) key. The "Node address" entry appears. An output
action occurs on the panel designated by its node address, including the
originating the panel. Setting an address of 0 sets the output action for all
panels.
Node Address
Press the arrow key to scroll to select a node address and press the
telephone (enter) key. The message Correlation Updated appears.
Press info key to return to previous menu.
Configuration
Version 2.4