Mircom TX3 SERIES Programming Manual page 33

2.7.1 Adding a New Record
Table 3 describes the information for adding new resident information. Use the
information in Table 3 to help you add new records.
To enter a resident
1.
2.
3.
Figure 2.
Telephone Access System Programming Manual
Version 2.4
LT-979 Copyright 2016
From the configuration menu, select the database menu. The database
selection appears.
Press the telephone key to enter the Add Record selection. The Enter Apt#
box appears.
Enter Apt#
[ _ _ _ _ ]
To enter an apartment number, use the number keys to select the
appropriate characters. Maximum number of characters is 8. See Figure 2
for information about the characters that correspond to each number.
Press any number key once, twice, three or more times to cycle through the
characters associated with that key. Capital letters appear after you cycle
through all of the lower case letters. When you reach the character you
want, stop pressing the key and the character will remain in the display.
Note that arrow keys are not used.
For Resident Apartment Number Entry Only
press * once = backspace
Keypad commands for entering an apartment number.
1
2 3
ABC DEF
4
5 6
GHI
JKL
MNO
7 8
9
PQRS
TUV WXYZ
#
*
0
press # once = space
Configuration
33