Input/Output - Mircom TX3 SERIES Programming Manual

To set the Factory Default
1.
2.
2.11

Input/Output

The Inputs and Outputs selection lets you define specific devices connected to
each input and output.
To access Inputs and Outputs
1.
To define inputs
1.
2.
Telephone Access System Programming Manual
Version 2.4
LT-979 Copyright 2016
Scroll the arrow to "Factory Dflt" in the main configuration menu and
press the enter (telephone) key. The Factory Default confirmation
selection appears.
Reset to default? <Y>
Press the telephone (enter) key to accept or i to cancel.
Press the arrow key to scroll to "Input/Output" in the main configuration
menu. The "Input/Output" selection appears.
Ipt/Opt Options
1 Inputs
2 Outputs
Press the arrow key to scroll to Inputs, and press the enter (telephone) key.
The "Input Types" selection appears.
Input Types
1 Postal lock
2 Fire P Override
3 Door Sense
4 GP Input 3
5 GP Input 4
Press the arrow key to scroll to the input you wish to configure and press
the telephone (enter) key. The Input Active State selection appears.
Ipt Active State
[ ] Close
Configuration
45