Changing Passcodes - Mircom TX3 Series Programming Manual

6.
7.
8.
9.
10.
To edit or delete a correlation
1.
2.
3.
4.
5.
2.15

Changing Passcodes

The Changing Passcodes selection lets you change your passcode for your access
level. There are three access levels.
TX3 Telephone Access System Programming Manual
Version 2.7
LT-979 Copyright 2018
Press the arrow key to scroll to a specific output and press the telephone
(enter) key. The "Schedule" selection appears
Select Schedule
0 Always
Press the arrow key to select a specific schedule and press the telephone
(enter) key. The "Correlation Timer" entry appears
Corr Timer
[ 001]
Press the arrow key to specify the duration for the correlation and press the
telephone (enter) key. The "Node address" entry appears. An output
action occurs on the panel designated by its node address, including the
originating the panel. Setting an address of 0 sets the output action for all
panels.
Node Address
Press the arrow key to scroll to select a node address and press the
telephone (enter) key. The message Correlation Updated appears.
Press info key to return to previous menu.
Press the arrow to scroll to "Correlations" in the main configuration menu
and press the enter (telephone) key. The "Correlation" menu appears.
Select Edit or Delete. A list of all the correlations appears.
Press the arrow keys to scroll to the correlation you would like to edit or
delete.
Press the telephone (enter) key to accept.
Press info key to return to previous menu.
Configuration
49