Viewing Configuration Information - Mircom TX3 SERIES Programming Manual

To enter configuration mode
1.
2.
3.
2.3

Viewing Configuration Information

To view configuration information, you must first enter the configuration mode.
To select viewing mode
1.
12 Telephone Access System Programming Manual
LT-979 Copyright 2016
Press
choices; the Configuration Menu, Operation Menu and the View
Configuration Information.
To access the Operation menu see paragraph 2.4.
To access the View Configuration Information menu see paragraph 2.3.
Select Configuration and press the telephone key
message appears.
Enter the Passcode
[ _ _ _ _ _ _ _ _ _ ]
Enter your passcode.
or
If you have not set a personal passcode, press 3 3 3 3. This number is the
four-digit factory default. You are now in configuration mode.
To continue with configuration see paragraph 2.5.
Press 9 9 9 9. The Main Menu appears. You may need to scroll up or
down to view the entire selection.
Main Menu
1. Configuration
2. Operation
3. View CFG Info
. The main menu appears with three
Main Menu
1 Configuration
2 Operation
3. View Cfg Info
Configuration
. The passcode
Version 2.4