Mircom TX3 SERIES Programming Manual page 17

2.6.2 Line Type
The Line Type function defines each of the 5 telephone lines as ADC, NSL or not
used. By default is line 1 is ADC and lines 2 to 5 as unused.
To define the line type operation
1.
2.
3.
4.
5.
2.6.3 Main Door DTMF
The Main Door DTMF function defines the key the resident presses to open the
main door. The default key is 9.
To define the Main Door DTMF key
1.
2.
Telephone Access System Programming Manual
Version 2.4
LT-979 Copyright 2016
Press the arrow key to scroll to "Line Type" and press the telephone key.
The line selection appears.
Using the down arrow key to select L-1, and press the telephone (enter)
key. The line type selection appears.
Use the '*" and or "#" key to make a selection.
Press the telephone key to enter the selection.
Press the info key to return to the previous menu.
Press the arrow key to scroll to "Main Door DTMF" and press the
telephone key. The Main Door DTMF selection appears.
Main Door DTMF
[ x ] '9'
[ ] '0'
Use the up or down key to move to the key number.
Line Type
L-1
L-2
L-3
Select Line Type
[ x ] ADC Type
[ ] NSL Type
[ ] Unused
Configuration
17