Factory Default; Input/Output - Mircom TX3 Series Programming Manual

3.
4.
2.12

Factory Default

The "Factory Default" selection lets you apply the factory default settings for the
telephone access system.
Note:
To set the Factory Default
1.
2.
2.13

Input/Output

The Inputs and Outputs selection lets you define specific devices connected to
each input and output.
To access Inputs and Outputs
1.
TX3 Telephone Access System Programming Manual
Version 2.7
LT-979 Copyright 2018
Use the up and down arrow keys to change the time and date.
Press the enter (telephone) key to save the changes.
Selecting the Factory Default does not delete any resident
information.
Scroll the arrow to "Factory Dflt" in the main configuration menu and
press the enter (telephone) key. The Factory Default confirmation
selection appears.
Reset to default? <Y>
Press the telephone (enter) key to accept or i to cancel.
Press the arrow key to scroll to "Input/Output" in the main configuration
menu. The "Input/Output" selection appears.
Ipt/Opt Options
1 Inputs
2 Outputs
Configuration
45