Rear Shock Absorber Adjusters - Ducati ST4s Owner's Manual

Hide thumbs Also See for ST4s:
Table of Contents

Advertisement

Available languages

Available languages

Rear shock absorber adjusters

The rear shock absorber has outer adjusters that enable
you to adjust your motorcycle to the load.
The adjuster (1, fig. 39) located on the rear right hand
side - at the control unit - sets rebound damping.
The adjuster (2, fig. 40) on the shock absorber expansion
reservoir controls compression damping.
Turning the adjusters (1 and 2) clockwise gives harder
damping H, turning anticlockwise gives softer damping
E
S.
STANDARD setting. Turn the adjusters all the way in
(clockwise) then:
- undo the adjuster (1) 14 clicks;
- undo the adjuster (2) 14 clicks.
1
fig. 39
The knob (3, fig. 40) located on the rear right hand side
under the passenger footpeg controls outer spring
preload.
To change spring preload, turn the knob (3) by hand
2
clockwise or anticlockwise to increase or decrease spring
preload as required.
STANDARD spring length:
149.5 mm.
3
fig. 40
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

St4s abs

Table of Contents