Unscrew the 8 fastening screws (3, fig. 62-63) that hold
the headlamp fairing to the side body panels.
Remove the fairing sliding it off the headlamp.
When refitting, it is necessary to loosen the screws
of both rear-view mirror mounts and then fit the headlight
fairing. Make sure direction indicator cables are not
squeezed and fit rear-view mirrors with the relevant
gasket, secure them with screws (1, fig. 60).
Set the headlight fairing so that its top edge is horizontal.
Tighten screws (3, fig. 62-63) starting from the front ones
then tighten mirror mount screws previously loosened.