Check for proper operation of the stand mechanism
(two springs, one into the other) and the safety sensor
(2) at regular intervals.
It is possible to start the engine with side stand
down and the gearbox in neutral. When starting the bike
with a gear engaged, pull the clutch lever (in this case
the side stand must be up).
A handgrip (1, fig. 33) that pivots on the left pillion
passenger footpeg is provided to help you place the
motorcycle on the centre stand or keep it upright when
manoeuvring to park it.
Fold out the handgrip. After use, just release it and it will
fold back to its rest position.
A specific power outlet (2, fig. 33) has been fitted to feed
dedicated accessories. Outlet is protected by a 20A fuse.