Set Up Of A Color Gdp (Cgdp) - GE D25 User Manual

D25
User's Manual

Set Up of a Color GDP (CGDP)

Overview This section describes how to set up the Color Graphical Display Panel
(CGDP) on your D25*. The CGDP uses a licensed software package named
the GDP 300 from Quasar Controls, which you must register as part of the
setup procedure. The CGDP software includes system firmware named the
Substation Bay Viewer™ 300 (SB Viewer 300) that runs on the D25 CGDP
and a Windows-based editor named the Substation Bay Config Tool™ 300
(SBC Tool 300) that runs on a PC.
The diagram below shows the relationship between the PC, D25 and CGDP
(SB Viewer 3 00). The SB Viewer 300 and D25 communicate with each
other using the DNP protocol over RS-485. The SB Viewer 300 is configured
using the SBC Tool 300 running on the PC. The D25 is configured using
SGConfig which also run on the PC.
Prerequisites Install the:
• Compact Flash Card (GE part number 160-0125) which includes
• SBC Tool 300 in Windows 7 or Windows Server 2008
28
D25 Configuration
DNP DPA
D25
Windows Embedded CE and SB Viewer 300
994-0081-3.00-21
PC
SBC Tool
SGConfig
300
DNP PACKETs
RS-485
GE Grid Solutions
SB Viewer 300 Configuration
SB Viewer 300
(DNP DCA)
CGDP
GE Information