Main Board - GE D25 User Manual

D25
User's Manual
Module Replacement,
5
6

Main Board

Procedure: How to remove the WESDAC board.
WESDAC
Before starting this procedure, see above: Disassembling the D25.
Board Removal
Step
1
2
3
4
WESDAC
Board Removal
118
Continued
Remove the Front Panel
With the ribbon cable
disconnected, shift the panel
to the right.
Pull the panel towards the
front to disengage the panel
from the slots in the lower
front edge of the enclosure.
Locate and loosen the captive screws that hold the metal mounting
plate in the D25 housing.
Pull the metal mounting bracket at both sides of the WESDAC
Board to disconnect connectors on back of board.
Tilt the module slightly so that the metal housing does not obstruct
its removal.
Carefully slide the mounting plate and attached WESDAC Board
out of the housing.
Grasp Mounting Bracket
994-0081-3.00-21
The panel will now be free of the
enclosure
Action
Handles
GE Grid Solutions
GE Information