GE D25 User Manual page 7

GE Grid Solutions
Document The following part numbers are not covered by this document. For
Scope
information on these parts, please refer to the D25 Multifunction IED
Installation and Maintenance Guide (994-0023).
For upgrading information and understanding the compatibility between the
new parts and obsolete parts, refer to Product Bulletin PRBT-0233 D25 Parts
Compatibility and Upgrade Guide.
Main Boards
504-0005
504-0010
Power Supplies
521-0118
521-0119
521-0124
521-0135
521-0136
521-0138
521-0139
DC Analog Card
517-0397
517-0404
517-0405
517-0406
517-0407
517-0408
517-0409
Ethernet Card
580-0993
580-0994
GE Information
D25 WESDAC Type II
D25 WESDAC Type II, 2MB Flash
D25 HV Power Supply, 140 - 300 VDC / 240 VAC, 24V Wetting
D25 Power Supply, 20 - 60 VDC, 48V Wetting
D25 Power Supply, 70 - 150 VDC, 24V Wetting
D25 Power Supply, 60-150 VDC / 120 VAC, 24V Wetting
D25 HV Power Supply, 250 VDC / 220 VAC, 24V Wetting
D25 HV Power Supply, 250 VDC / 220 VAC, 48V Wetting
D25 Power Supply, 60-150 VDC / 120 VAC, 48V Wetting
D25 DC Analog I/P 8 Channel ± 5V
D25 DC Analog I/P 8 Channel ± 1mA
D25 DC Analog I/P 8 Channel ± 5mA
D25 DC Analog I/P 8 Channel ± 10mA
D25 DC Analog I/P 8 Channel ± 20mA
D25 DC Analog I/P 16 Channel ± 1mA
D25 DC Analog I/P 16 Channel ± 5mA
D25 10BASE-FL XCOM Card
This card is obsolete and is replaced by 504-0305LF. A 100BASE-FX
switch or converter is required when upgrading from 580-0993 to 504-
0305LF, since 10BASE-FL is incompatible with 100BASE-FX
580-0994: D25 10BASE-T XCOM CARD
Replaced by 504-0305LF.
994-0081-3.00-21
D25
User's Manual
7