Replacing The Sfp Transceiver; Opening The Handle On A Canister; Removing The Canister From The Enclosure - IBM Storwize V7000 Troubleshooting And Maintenance Manual

Figure 21. Opening the handle on a canister
5. Squeeze them together to release the handle.
Figure 22. Removing the canister from the enclosure
6. Pull out the handle to its full extension.
7. Grasp canister and pull it out.
8. Insert the new canister into the slot with the handle pointing towards the center of the slot. Insert
the unit in the same orientation as the one that you removed.
9. Push the canister back into the slot until the handle starts to move.
10. Finish inserting the canister by closing the handle until the locking catch clicks into place.
11. Reattach the SAS cables.

Replacing the SFP transceiver

When a failure occurs on a single fibre-channel link, the SFP transceiver might need to be replaced.
88
Storwize V7000 Version 6.1.0: Troubleshooting, Recovery, and Maintenance Guide