IBM Storwize V7000 Troubleshooting And Maintenance Manual page 46

Reset service IP address and superuser password command
4
Use this command to obtain service assistant access to a node even if the current state of the node is
4
4 unknown. The physical access to the node is required and is used to authenticate the action.
Syntax
4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
satask chserviceip
4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
satask chserviceip
4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
satask chserviceip
4
Parameters
4
4 -serviceip
(Required) The IPv4 address for the service assistant.
4
4 -gw
(Required) The IPv4 gateway for the service assistant.
4
-mask
4
4 (Required) The IPv4 subnet for the service assistant.
4 -serviceip_6
(Required) The IPv6 address for the service assistant.
4
-gw_6
4
(Required) The IPv6 gateway for the service assistant.
4
-prefix_6
4
4 ((Required) Resets to the default IPv4 address.
4 -default
(Required) The IPv6 prefix for the service assistant.
4
-resetpassword
4
4 (Optional) Sets the service assistant password to default.
Description
4
This command resets the service assistant IP address to the default value passw0rd or to the address that
4
is specified. If the node is active in a cluster, the cluster superuser password is reset; otherwise, the
4
4 superuser password is reset on the node.
If the node becomes active in a cluster, the superuser password is reset to that of the cluster. You can
4
4 configure the cluster to disable resetting the superuser password. If you disable that function, this action
fails.
4
4 This action calls the satask chserviceip command and the satask resetpassword command.
Reset service assistant password command
4
Use this command to obtain service assistant access to a node even if the current state of the node is
4
4 unknown. The physical access to the node is required and is used to authenticate the action.
30
Storwize V7000 Version 6.1.0: Troubleshooting, Recovery, and Maintenance Guide
-serviceip ipv4
-gw ipv4
-serviceip_6 ipv6
-gw_6 ipv6
-default
-resetpassword
-mask ipv4 -resetpassword
-prefix_6 int -resetpassword