Using The Handle To Remove A Power Supply - IBM Storwize V7000 Troubleshooting And Maintenance Manual

Figure 25. Using the handle to remove a power supply unit
6. Insert the replacement power supply unit into the enclosure with the handle pointing towards the
center of the enclosure. Insert the unit in the same orientation as the one that you removed.
7. Push the power supply unit back into the enclosure until the handle starts to move.
8. Finish inserting the power supply unit into the enclosure by closing the handle until the locking
catch clicks into place.
9. Reattach the power cable and cable retention bracket.
10. Turn on the power switch to the power supply unit.
If required, return the power supply. Follow all packaging instructions, and use any packaging materials
for shipping that are supplied to you.
92
Storwize V7000 Version 6.1.0: Troubleshooting, Recovery, and Maintenance Guide