IBM Storwize V7000 Troubleshooting And Maintenance Manual page 85

Table 19. Event IDs and codes (continued)
Notification
Event ID type
009052 E
009100 W
009101 W
009110 W
009115 W
009150 W
009151 W
009170 W
009171 W
009172 W
009173 W
009174 W
009176 W
009177 W
009178 W
009179 W
009180 E
009181 W
009182 W
010002 E
010003 W
010006 E
010008 E
010010 E
010011 E
010012 E
010013 E
010014 E
010017 E
010018 E
010019 E
010020 E
010021 W
Condition
The following causes are possible:
v The node is missing
v The node is no longer a functional member of the cluster
v One or more nodes are not available
v The node has probably had a hardware or software failure
The software install process has failed.
The software upgrade package delivery has failed.
Software installation process stalled due to lack of redundancy.
A software downgrade has failed.
Unable to connect to the SMTP (email) server
Unable to send mail through the SMTP (email) server
The Metro Mirror or Global Mirror feature capacity is not set.
The FlashCopy feature capacity is not set.
The Virtualization feature has exceeded the amount that is licensed.
The FlashCopy feature has exceeded the amount that is licensed.
The Metro Mirror or Global Mirror feature has exceeded the amount that
is licensed.
The value set for the virtualization feature capacity is not valid.
A physical disk FlashCopy feature license is required.
A physical disk Metro Mirror and Global Mirror feature license is
required.
A virtualization feature license is required.
Automatic recovery of offline node failed.
Unable to send email to any of the configured email servers.
The external virtualization feature license limit was exceeded.
The node ran out of base event sources. As a result, the node has stopped
and exited the cluster.
The number of device logins has reduced.
A software error has occurred.
The block size is invalid, the capacity or LUN identity has changed
during the managed disk initialization.
The managed disk is excluded because of excessive errors.
The remote port is excluded for a managed disk and node.
The local port is excluded.
The login is excluded.
The local port is excluded.
A timeout has occurred as a result of excessive processing time.
An error recovery procedure has occurred.
A managed disk I/O error has occurred.
The managed disk error count threshold has exceeded.
There are too many devices presented to the cluster.
Error
code
1195
2010
2010
2010
2008
2600
2601
3030
3031
3032
3032
3032
3029
3035
3036
3025
1194
3081
3032
2030
1630
2030
1660
1310
1220
1210
1230
1211
1340
1370
1310
1310
1200
Chapter 7. Event reporting
69