Fibre-Channel Ports On The Node Canisters - IBM Storwize V7000 Troubleshooting And Maintenance Manual

Each node canister has four Fibre Channel ports located on the left side of the canister as shown in
Figure 11. The ports are in two rows of two ports. The ports are numbered 1 - 4 from left to right and top
to bottom.
Note: The reference to the left and right locations applies to canister 1, which is the upper canister. The
port locations are inverted for canister 2, which is the lower canister.
Figure 11. Fibre-channel ports on the node canisters
There are two green LEDs associated with each port: the speed LED and the link activity LED. These
LEDs are in the shape of a triangle. The LEDs are located in between the two rows of the ports as shown
in Figure 12. Figure 12 shows the LEDs for the Fibre Channel ports on canister 1. Each LED points to the
associated port. The first and second LEDs in each set show the speed state, and the third and fourth
LEDs show the link state.
1 2 3 4 5 6 7 8
1 2
3
4
Figure 12. LEDs on the fibre-channel ports
8
Storwize V7000 Version 6.1.0: Troubleshooting, Recovery, and Maintenance Guide