IBM Storwize V7000 Troubleshooting And Maintenance Manual page 47

Syntax
4
4 4 4 4 4 4 4 4 4 4 4
satask resetpassword
4
Parameters
4
None.
4
Description
4
This command resets the service assistant password to the default value passw0rd. If the node is active in
4
4 a cluster, the cluster superuser password is reset; otherwise, the superuser password is reset on the node.
If the node becomes active in a cluster, the superuser password is reset to that of the cluster. You can
4
4 configure the cluster to disable resetting the superuser password. If you disable that function, this action
fails.
4
4 This command calls the satask resetpassword command.
Snap command
4
4 Use this command to collect diagnostic information from the node and to write the output to a USB key.
Syntax
4
4 4 4 4 4 4 4 4 4 4 4 4 4
satask snap
4
Parameters
4
-options
4
4 (Optional) Specifies which diagnostic information to collect.
Description
4
This command moves a snap file to a USB key.
4
4 This command calls the satask snap command.
Apply software command
4
4 Use this command to install a specific software package on the node.
Syntax
4
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
satask installsoftware
4
Parameters
4
-file
4
4 (Required) The file name of software installation package.
4 -ignore
(Optional) Overrides prerequisite checking and forces installation of the software.
4
-options
-file filename
Chapter 4. Storwize V7000 user interfaces for servicing your system
-ignore
31