List Of Gx Developer Setting Items For Serial Communication Modules - Mitsubishi QJ71C24N User Manual

3 SPECIFICATIONS

3.7 List of GX Developer Setting Items for Serial Communication Modules

Parameter setting item
I/O assignment setting
Switch setting
Interrupt pointer setting
Remote password
settings
3 - 19
The following table lists the parameters that are set using the GX Developer.
Parameter description
Performs I/O assignment
for the Q series C24 and
enables the switch settings
listed below.
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Performs setting for reading
reception date with interrupt
programs.
Sets the remote password
and the Q series C24 that
performs the check.
Set data
Type
Model name
Points
Start X/Y
CH1 Transmission setting
CH1 Communication rate setting
CH1 Communication protocol setting
CH2 Transmission setting
CH2 Communication rate setting
CH2 Communication protocol setting
Station number setting
Interrupt pointer Start No.
CPU side
Interrupt pointer No. of units
Intelligent Start I/O No.
module side
Start SI No.
Password settings
Password active Model name
module settings Start XY
MELSEC-Q
Reference section
Section 4.5.1
Section 4.5.2
Section 4.5.3
User's Manual
(Application)
3 - 19