Mitsubishi QJ71C24N User Manual page 318

11 TROUBLESHOOTING
11
11 - 2
[Displays]
• Module
The following information is displayed:
Module name
I/O Address
Implementation Position: The slot position where the module is mounted
Product information
• Unit access (Module access)
Displays access permissions when the Q series C24 ready (X1E) is turned
on and the watchdog timer error (X1F) is turned off.
• Status of I/O Address Verify
Displays whether or not the module for which the user set the parameters
matches the module installed.
• Remote password setting status
Displays the setting status of the remote password.
• Present Error
Displays the error code of the latest error occurrence.
• Error Display
Displays the error codes for any errors that have occurred in any of the
functions being used.
• Error details, corrective action
Displays the error details and corrective action for the error code selected in
Error Display.
Error details and corrective actions are displayed when GX Developer
Version 8.17T or later used.
(2) Checking using the hardware information screen of the GX
Developer diagnostic functions
[Startup procedure]
GX Developer [Diagnostics]
Module's Detailed Information
: The name of the module installed
: The start input/output signal (number) of the target
module
: Product information
The last character of the product information
indicates the function version of the module.
(Example) If the last character is "B," it means
that the module is of function
version B.
[System monitor]
H/W Information
MELSEC-Q
11 - 2