9 UTILITY PACKAGE (GX Configurator-SC)
9.4.12 Resetting the buffer memory/flash ROM setting values to the default values
(Procedure 1) In the [Monitor] screen, select [Default request] for [System setting default].
(Procedure 2) Click on Execute test .
(Procedure 3) Change the setting of [Flash ROM write allow/prohibit] to "Allowed."
(Procedure 4) In the [Monitor] screen, select [Write request] for [System setting write].
(Procedure 5) Click on Execute test .
(Items subject to this operation in the [Monitor] screen)
9.4.13 Flash ROM write allow/prohibit setting
(Procedure 1) In the [Monitor] screen, select [Flash ROM write allow/prohibit] and set "Allowed"
(Procedure 2) Click on Execute test .
9 - 34
This section explains how to reset the values set in the buffer memory/flash ROM to
their default values.
[Startup procedure]
[Online]
[Monitor/Test]
[Monitor] screen
[Operating procedure]
The setting values in the buffer memory will return to their default values.
The setting values in the flash ROM will return to their default values.
When confirming the processing results in GX Configurator-SC, perform
Read from module .
This section explains the settings to allow or prohibit writing to the flash ROM.
[Startup procedure]
[Online]
[Monitor/Test]
[Monitor] screen
[Operating procedure]
or "Prohibited".
[Flash ROM write allow/prohibit] will be set to "Allowed" or "Prohibited",
accordingly.
"Select monitor/Test module"
"Select monitor/Test module"
MELSEC-Q
Monitor/Test
Monitor/Test
9 - 34