Mitsubishi QJ71C24N User Manual page 231

9 UTILITY PACKAGE (GX Configurator-SC)
9 - 5
(6) Number of parameters that can be set in GX Configurator-SC
When multiple intelligent function modules are mounted, the number of
parameter settings must not exceed the following limit.
When intelligent function modules are
installed to:
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PH/Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q00UJ/Q00U/Q01UCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDH/Q10UDH/
Q13UDH/Q20UDH/Q26UDH/Q03UDE/
Q04UDEH/Q06UDEH/Q10UDEH/
Q13UDEH/Q20UDEH/Q26UDEH/
Q50UDEH/Q100UDEHCPU
MELSECNET/H remote I/O station
For example, if multiple intelligent function modules are installed to the
MELSECNET/H remote I/O station, configure the settings in GX Configurator so
that the number of parameter settings for all the intelligent function modules does
not exceed the limit of the MELSECNET/H remote I/O station. Calculate the total
number of parameter settings separately for the initial setting and for the auto
refresh setting.
The number of parameters that can be set for one module in GX Configurator-SC
is as shown below.
Target Module
QJ71C24N
QJ71C24N-R2
QJ71C24N-R4
QJ71C24
QJ71C24-R2
Maximum number of parameter settings
Initial setting
512
512
512
512
512
2048
4096
512
Initial setting
0 (Not used)
0 (Not used)
0 (Not used)
0 (Not used)
0 (Not used)
MELSEC-Q
Auto refresh setting
256
256
256
256
256
1024
2048
256
Auto refresh setting
48 (Max.)
49 (Max.)
48 (Max.)
48 (Max.)
49 (Max.)
9 - 5