10 DEDICATED INSTRUCTIONS
Error
Program example
10 - 25
(1) When a dedicated instruction is failed, the status display device at completion
((D)+1) turns ON and the error code is stored in the execution result ((S)+0).
In case of operation errors, Error flag (SM0) turns ON and the error code is stored
in SD0.
Refer to the following according to the error code, and check and correct the error.
<Error code>
4FFF
or less: QCPU User's Manual
H
(Hardware Design, Maintenance and Inspection)
7000
or later: Section 11.2
H
For the program example of the CPRTCL instruction, refer to Section 8.1.6.
MELSEC-Q
10 - 25