9 UTILITY PACKAGE (GX Configurator-SC)
change the setting values via
offline operation?
Start the [Flash ROM setting]
screen.
Is the original data
saved in a file?
Display the system setting sub-screen
for changing the setting values.
Click on each of the setting items
corresponding to the setting values
you wish to change. For each item,
enter or select the new setting value.
NO
changed all the applicable
In the [Flash ROM setting] screen,
click on the Save file button. Then,
in the file designation dialog box,
designate the file name under which
the data will be saved. All of the new
setting values will be saved in the file.
Close the [Flash ROM setting] screen.
9 - 11
REMARKS
The following diagram illustrates the overview of a procedure in which the GX
Configurator-SC is used to change the system setting values of the Q series C24
and save the new values to a file or write them to the Q series C24's flash ROM.
Start
Do you wish to
YES (offline operation)
NO
Read the data from the file.
Have you
setting values?
YES
1
Close
End
NO
Go to 1) setting via online operation
[Select a target intelligent function module]
screen.
See Section 9.3.1.
YES
Load file
Select in the [Flash ROM setting] screen.
See Section 9.4.
Change the setting values in the corresponding
system setting sub-screens.
See Sections 9.4.1 to 9.4.11.
This operation is allowed only in the [Flash ROM
setting] screen.
See Section 9.3.3.
1 Save the new system setting values in a file
for backup.
MELSEC-Q
9 - 11