Mitsubishi QJ71C24N User Manual page 238

9 UTILITY PACKAGE (GX Configurator-SC)
1) (Online operation)
Start the [Monitor/Test] screen.
Is the original data saved?
NO
Set the flash ROM write allow/prohibit
designation to "allowed".
Display the system setting sub-screens
for changing the setting values.
Click each of the setting items
corresponding to the setting values to
be changed. For each item, enter or
select the new setting value in the
[Setting value] field.
Designate the setting value for the
item to be changed, then click on the
Execute test button.
The setting value will be written to the
Q series C24's flash ROM.
Have you
NO
changed all the applicable
setting values?
YES
Do you wish
to write the new setting
values to the module's
buffer memory?
NO
In the [Flash ROM setting] screen,
click on the Save file button. Then,
in the file designation dialog box,
designate the file name under which
the data will be saved. All of the new
setting values will be saved in the file.
Set the flash ROM write allow/prohibit
designation to "prohibited".
Close the [Monitor/Test] screen.
Close
End
9 - 12
[Select a target intelligent function module]
screen
See Section 9.3.1
YES
Is the data saved in a file?
YES
Read the data from the file.
Load file
Select in the [Monitor] screen.
See Section 9.4.13.
Select in the [Monitor] screen.
See Section 9.4.
Each system setting sub-screen.
See Section 9.4.
The [Monitor] screen or each sub-screen.
See Section 9.3.3.
1
YES
Reset the CPU.
The [Monitor] screen or each sub-screen.
See Section 9.3.3.
2
Select in the [Monitor] screen.
See Section 9.4.13.
NO
Read the data from the module's flash ROM.
1 To write all the new setting values to the flash ROM
at once, click on the Write to module button after
all the applicable setting values have been changed.
All the setting values will be written to the Q series
C24's flash ROM.
2 Save the new system setting values in a file for
backup.
MELSEC-Q
Read from module
9 - 12