Mitsubishi QJ71C24N User Manual page 243

Melsec-q series
Hide thumbs Also See for QJ71C24N:
Table of Contents

Advertisement

9 UTILITY PACKAGE (GX Configurator-SC)
9 - 17
Close
End setup
POINT
(1) When the setting operation is complete in each system setting screen, register
the system setting data in the flash ROM, then restart the programmable
controller CPU to resume data transmission.
(2) If two or more intelligent function module utility packages are running, perform
each operation after selecting the target utility package from the task bar and
making it active.
(3) When the menu screen for system registration to flash ROM (see Section 9.4) is
closed, all the system setting data will be cleared. Before closing the screen, write
the data to the module (enabled only via online operation) or save it to a file.
(3) Data/file to be created with utility package
The following data or files that are created with the utility package can be also
handled in GX Developer. Figure 9.1 shows respective data or files are handled
in which operation.
<Intelligent function module parameter>
(a) This represents the data created in Auto refresh setting, and they are stored
in an intelligent function module parameter file in a project created by GX
Developer.
Project
Program
Parameter
(b) Steps 1) to 3) shown in Figure 9.1 are performed as follows:
1) From GX Developer, select:
[Project]
2) On the intelligent function module selection screen of the utility, select:
[Intelligent function module parameter]
parameters]
3) From GX Developer, select:
[Online]
module parameters"
Alternatively, from the intelligent function module selection screen of the
utility, select:
[Online]
: Closes the screen that is currently open and returns
to the previous screen.
: Saves/writes the system setting data, closes the
current screen, and returns to the previously
displayed screen.
With offline operation, only [Save file] and [Load
file] are enabled.
PLC Parameter
Network Parameter
Intelligent Function Module Parameter
[Open project] / [Save] / [Save as]
[Read from PLC] / [Write to PLC]
[Read from PLC] / [Write to PLC]
MELSEC-Q
[Open parameters] / [Save
"Intelligent function
9 - 17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qj71c24n-r2Qj71c24n-r4Qj71c24Qj71c24-r2

Table of Contents