9 UTILITY PACKAGE (GX Configurator-SC)
9.3 Utility Package Operation
9.3.1 Operation overview
GX Developer screen
[Tools] – [Intelligent function utility] – [Start]
Select a target intelligent function
module screen
See Section 9.3.2
When used via offline operation
Select [Tools] – [Flash ROM setting] from the menu bar.
POINT
The various setting values to be registered in the Q series
C24's flash ROM can be saved in a file of the PC via offline
operation.
Use online operation to write system setting values to the
Q series C24.
9 - 9
The following settings must be performed before starting
the intelligent function module utility:
• Set the project using the GX Developer
• Set "QCPU (Q mode)" for the PC series.
When used via online operation
When auto refresh is set
Select the module type and
module model name.
POINT
MELSEC-Q
1) Go to next page
2) Go to next page
Flash ROM settings screen
See Section 9.4
To each setting screen
See Sections 9.4.1 to 9.4.11
9 - 9