Command
DeleteCasFile
5.4.7
LDAP Commands
The commands under the IPNetworking\OpenLdap directory allow you to perform various
Lightweight Directory Access Protocol (LDAP) actions.
Sub-Command
LdapSTatus
LdapSearch
LDapOpen
LDapSetDebugmode
LDapGetDebugmode
User's Manual
Short
Arguments
Format
PS/CAS/DC
<TableIndex>
F
Table 9: LDAP Commands
Arguments
-
<search key> <attribute1>
[<attribute 2> ...<attribute
5>]
-
<mode>
-
following:
0 = NO_ALARMS (means stop
sending AIS)
1 = AIS_ALARM
2 = STOP_RAI_ALARM
3 = SEND_RAI_ALARM
Deletes all the device's CAS files when
<TableIndex> is set to -1 (other options
are currently not supported).
Displays the LDAP connection status.
Searches an LDAP server. The parameters
enclosed by [] are optional.
Opens a connection to the LDAP server using
parameters provided in the configuration file.
Sets the LdapDebugLevelMode parameter.
Possible levels 0-3.
Gets the LdapDebugLevelMode parameter
value
80
Mediant 2000
Description
Description
Document #: LTRT-68822